B205AB CL MOR

The B200/B500 series clutches share the same design. A full complement of cams is retained in an outer race. This requires a bearing supported hardened shaft as the inner race. These are primarily used for back stopping applications. It can also be used for indexing and overrunning applications as well. The B200 series has the same outside diameter as a metric 200 series ball bearing. This makes it easy to facilitate assembly adjacent to the ball bearing. The B500 series was created as a replacement backstop for many different gear reducers. It comes in many different diameters and generally has a larger cam than the B200 series clutch. Both series come pre-lubricated with special light grease. In service they can be lubricated with either grease or oil.

Morse® Mechanical CAM Clutch, Series: B200, 0.929/0.93 in Bore, 2.0448/2.0463 in OD, 1 in Overall Length, 80 ft-lb Torque, 2500 rpm Overrunning Maximum, Shaft Mounting, 1 in W Dimensions