33018 BLT

Taper Roller Bearings utilize cone shaped rollers in an inner ring which rolls on tapered outer ring surfaces. The rollers are guided by a cage and the projection lines of the tapered surfaces meet at a common point on the bearing axis. Their design makes them suitable for combined (radial and axial) loads and heavy axial loads determined by the contact angle. Standard designs are typically separable and most commonly designed with a cone (inner ring with cage and rollers), which can be mounted separately from the cup (outer ring). This design allows for great flexibility in assembly and is one of the key advantages to this type of bearing. Unlike the common inch series taper roller bearings, metric Tapered Roller Bearings are sold exclusively as a complete cup and cone set.

TRITAN® Tapered Roller Bearing, 90 mm Bore, 140 mm OD, 39 mm Width, 75000 lb Load, 2000 rpm Grease/3000 rpm Oil Maximum, 250 deg F