NCF2928VC3 TKN

A radial cylindrical roller bearing consists of an inner and/or outer ring and a complement of controlled-contour cylindrical rollers. Depending on the style of bearing, either the inner or the outer ring will have two roller-guiding ribs. The other ring, separable from the assembly, has one rib or none. The ring with two ribs axially locates the position of the roller assembly. The diameters of these ribs may be used to support the roller. One of the ribs may carry light thrust loads when an opposing rib is provided in the mating ring.

Timken® Radial Cylindrical Roller Bearing, Full-Complement, Series: NCF29, 140 mm Bore Dia, 190 mm Outside Dia, Single Rows, 30 mm Width, 243 kN Dynamic/389 kN Static, 850 rpm Grease/1000 rpm Oil Maximum, 302 deg F