T750 BLT

The T Series bearing is the most popular Cylindrical Roller Thrust Bearing. It is single acting (one direction) and designed to operate under heavy loads at moderate speeds. One of the thrust plates is stationary with respect to the shaft while undersized on the outer diameter, while the second thrust plate is stationary with the housing and oversized on the bore diameter. The roller assembly is located by the shaft and its inside diameter is machined to provide the correct operating clearance. The non-locating diameters of the thrust plates are designed to allow lubricant flow. Machined Brass retainers are standard.

TRITAN® Cylindrical Roller Thrust Bearing, Series: T Series, 7 in Bore, 14 in OD, 3 in Width, Single Thrust Direction, 1500000 lb Load, 500 rpm Grease/1000 rpm Oil Maximum