WRC-CANR-DF-DN PRS

Expands the usable applications for DeviceNet, J1939, SDS, and other CAN V2.0, Part A and Part B compatible CAN bus systems; Enables the creation of star, tree and other non-linear network topologies; Works with both trunk lines and drop lines; Allows operation at higher speeds for specific distances; Fiber-optics provide superior electrical interference protection; Operates at 9.6K to 1M fixed baud for J1939 or CAN bus networks; Auto-detects baud rate on DeviceNet (125k, 250k, or 500k baud); Isolates the two sections of the CAN bus (copper wire); Extender operation is transparent to Master and Slave devices; Powered from the CAN bus network; Sealed NEMA-4X enclosure; Standard round, mini-style connector with male pins for copper cable; Standard Fiber Optic ST female connector for use with multi-mode fiber; Standard CAN chips manage CAN bus error detection and handle message bus arbitration ; Less than 900 µsec latency; Termination resistor built in on the CAN bus interfaces; Two identical WRC-CANR-DF units are included in an order kit and both are required for each application